Badger Extra Halotron-1 Handheld Fire Extinguishers

THIS PRODUCT IS BEING DISCONTINUED BY BADGER EFFECTIVE DEC 1, 2024. There are no Badger-branded replacements available at this time.

The corresponding Amerex Halotron I models (item # 09522) are still available, however they are more expensive. The Halotron I agent is no longer produced, and while manufacturers can still sell extinguishers that utilize existing stock and recycled material, the supply is dwindling and the cost is expected to increase greatly. We therefore recommend Ansul's line of CleanGuard+ extinguishers (item # 09626) which use a clean agent that is not scheduled for phaseout and has superior health and environmental properties.

Badger Halotron-1 stored pressure hand-portable fire extinguishers offer the most effective clean agent with Class A, B and C fire capability. Halotron-1 is a versatile and effective multi-purpose clean extinguishing agent where potentially abrasive or corrosive dry chemical agents could cause significant damage to surrounding equipment. It is ideally suited for office computer areas, data storage, telecommunications, high tech clean rooms, aircraft, air traffic control towers, robotics machinery, paint finishing applications, yachts, museums, laboratories, radio/TV broadcast studios, or any process that requires an effective clean agent and extended discharge range. Use Halotron I anywhere a clean agent extinguisher must be more effective, versatile, and user friendly than water or carbon dioxide.

Halotron I discharges as a rapidly evaporating liquid which leaves no residue. It effectively extinguishes Class A and B fires by cooling and smothering and it will not conduct electricity back to the operator. Halotron is pressurized with Argon gas and is an EPA and FAA approved agent suitable for use on Class A, B and C fires. It has a low Global Warming Potential (GWP) of 0.04 - 0.24, low Ozone Depleting Potential (ODP) of 0.014 (twelve times lower than the EPA maximum allowable ODP of 0.20) and a low Atmospheric Lifetime (3-1⁄2 to 11 years). Another clean agent alternative to Halon and Halotron I is Ansul's line of CleanGuard+ extinguishers (item # 09626).

Technical note: The 2018 edition of NFPA 99 states at 16.9.1.3 that "Clean agent or water-mist type fire extinguishers shall be provided in operating rooms" and in A.16.19.1.3. "Dry chemical fire extinguishers should not be provided in operating rooms. The clean agent extinguishers selected should have a Class A rating of some form."  At 16.9.1.4 NFPA states "Clean agent-type fire extinguishers shall be provided in telecommunication entrance facilities and telecommunication equipment rooms."

These units feature a chrome-plated brass valve, a stainless steel handle, lever and hose band, and an internal steel siphon tube. The steel cylinder has a twelve year hydrostatic test requirement. These extinguishers are UL Listed and USCG Approved (when equipped with the optional bracket) and come with a 6 year manufacturer warranty.  

The Safety Data Sheet (SDS) for Halotron-1 agent is available for download as is the Badger Halotron-1 specification sheet.

These units come with a wall hanger hook. For vehicle brackets see the table below. The 2-1/2 lb units are only sold in packages of six; please contact us if you'd like to order those.

Specifications: